flogo4.gif (5651 bytes)       Back Flowcon Up Next

Flowcon      
FlowconSupportTroubleshooting .  HW_SimStuck

Symptom:

Stuck in "simulator" mode.

 

Probable Cause (in most likely order)

image Wrong Batcher operating software.

The software is matched to your board, so you/we don't accidently load the wrong customer version and cause a major mechanical malfunction.

image Wrong or bad Flowcon board.

 

Diagnostic:

image (none)

 

Fix:

image Make sure operating software is correct for your Batcher. If incorrect, call Flowcon service number.
image Replace Flowcon board.